intelligent brushless sine wave controller for electric bike/electric scooter/brushless motor
if motor not have hall wire,not connect hall wires also can work
Voltage:36V/42V/48V/52V/60V/72V/84V universal
Current:26A-33A
Transistor: 12
Phase angle: 60 °/120 ° all can be used
Rated power:500W-800W-1000W all can work
3.PAS(pedal assist)
(self-learnig line )
(throttle)
how to connect ?
(color to color)
2. connect the battery line(red wire :battery + , black:battery-)
3. connect the controller throttle line(color to color),connect electric door lock
(if your throttle not have electric door lock,controller electric door lock can be shorted)
4. connect the hall line(if motor without hall line, don't need connect)
, the wheel will forward or reverse.
(,Separate the self-learning line.
, Separate the self-learning line. Docking the self-learning line again,
if wheel forward ,Separate the self-learning line.)
48V/52V/60V/64V/72V 26-33A 500-1000W 60°/120° Phase Angle Universal Brushless Controller
Product parameters:
Color: golden
Condition: 100% brand new
Item type: Motor Controller
Material: Aluminium alloy
Voltage: 48V-52V-60V-64V-72V
Weight: about 588g
Power: 500W-1000W
Current limit: 26A-33A
12-tube sinusoid controller,Normal Instrument line, a Sine wave model only can work with hall sensored brushless DC motor .
If motor doesn't have hall sesnor or hall sensor is damage .it is square wave controller .
1. 48V, 60V, 64V,72V, universal
2. One-line instrumentation adds more adaptability, about 80%.
3. In terms of hardware: thicker aluminum shell, better heat dissipation. The motherboard solution is better. Power tubes, capacitors, copper bars, etc. are better.
4.Suitable Motor Phrase Angle: 60°/120° Phase Angle Universal
5.Suitable for: electric bicycle, scooter,Small tricycle,Two-wheeler etc
controller function:
(generally not used)
(generally not used)
4.3-speed (low/middle/high speed)
6. one-line LCD meter
7. hall LCD meter
(PAS)
9. alarm power supply
10. alarm signal
11. cruise
12. reverse
15. Phase Velocity Meter Line
How to connect controller?
(color to color)
2. connect the battery line(red:+ , black:-)
3. connect the controller throttle line, electric lock(if throttle not have electric lock,controller electric lock docking,if controller electric lock is 1 wire,can connect to battery + )
4. connect the hall line(if motor without hall line, don't need connect)
, the wheel will forward or reverse.
(,Separate the self-learning line.
, Separate the self-learning line. Docking the self-learning line again,if wheel forward ,Separate the self-learning line.)
Thanks for subscribing!
This email has been registered!