Description
xHello, my friend, if I can't reply to you in time, please contact me on WhatsApp: +8617352882023 or my email number :936442401@
Flipsky 300A ESC Waterproof ESC Speed Controller for E-boat E-foil E-surfing
Specification
Wiring Diagram
The speed controller can be connected to the motor by soldering directly or with high quality connectors. Always use new connectors, which should be soldered carefully to the cables and insulated with heat shrink tube.
The maximum length of the battery packwires shall be within 6 inches For normal ESC with BEC output please see as follows:
OPTO ESCs please refer to following connections:
Important warnings:
*Always remove the propeller or pinion when working on a power system with the battery connected.
*Never use battery packs that are known to overheat.
*Never use short circuit battery or motor terminals.
*Always use proper insulation material for cable insulation.
*Always use proper cable connectors.
*Do not exceed the number of cells or servos specified by the ESC.
*Install the ESC in a suitable location with adequate ventilation for cooling.
*Never switch your transmitter OFF while the battery is connected to your ESC.
*Only connect your battery pack just before driving and do not leave your battery pack connected after driving. *Handle your model with extreme care once the battery is connected and keep away from the propeller at all times. Never stand in-line or directly in front of any rotating parts.
Packaging & Shipping
Related Products
Certifications
- Choosing a selection results in a full page refresh.