Description
xDear friend, thank you for visiting the store, if you need more models and new products, please contact us and get a discount:
WhatsApp: +86 17873567381
Email: 1value168@
Flipsky FSESC 4.12 50A 60V Electric Speed Controller Based on VESC4.12
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
The Flipsky ESC is based upon the VESC Open Source Project, and compatible with VESC Software.
The Flipsky ESC is a highly modifiable electronic speed controller designed for DIY Electric Skateboards conversions in mind.
The Flipsky ESC allows you to use sensorless motors to achieve smooth start-up from a stop,while traditional RC ESC's may have trouble starting. It also provides strong reliable and progressive electric braking.
Specs:
Hardware: V4.12
EPRM:60000
Firmware: the latest firmware version
PCB:4 layers, size: 40*60mm
Current: 50A continuous / 240A peak,values depend on the mounting and ambient temperature around the device!
Voltage: 8V-60V ( Safe for 3S to 12S LiPo,Voltage spikes may not exceed 60V!)
Recommended 10S battery
BEC: 5V/1.5A
BEC type: Internal driver support
Timing: Software calibration
Cutoff Voltage: Programmable
Frequency: PWM input
Governor: No
Weight: 80g
FSESC4.12 Size: 110x40x20mm
Programming card: No
Reverse: Yes
Firmware: the latest firmware version
PCB:4 layers, size: 40*60mm
Current: 50A continuous / 240A peak,values depend on the mounting and ambient temperature around the device!
Voltage: 8V-60V ( Safe for 3S to 12S LiPo,Voltage spikes may not exceed 60V!)
Recommended 10S battery
BEC: 5V/1.5A
BEC type: Internal driver support
Timing: Software calibration
Cutoff Voltage: Programmable
Frequency: PWM input
Governor: No
Weight: 80g
FSESC4.12 Size: 110x40x20mm
Programming card: No
Reverse: Yes
Motor wire: 12AWG
Power cable: 12AWG
Specification
| Hardware | V4.12 |
| Firmware | Latest Version |
| Instantaneous current | 50A continuous / 240A peak |
| Voltage | 8V~60V (Cells: 3~12S LiPo) |
| BEC type | Internal driver support |
| Motor control interface | PPM signal (RC servo), analog, UART, I2C, USB or CAN-bus |
| Frequency | PWM input |
| Reverse | Yes |
Product Advantages
Wiring Diagram
Packaging & Shipping
Certifications
- Choosing a selection results in a full page refresh.