Description
xHello, my friend, if I can't reply to you in time, please contact me on WhatsApp: +8617352882023 or my email number :936442401@
Flipsky FSESC 75100 V2.0 With Aluminum PCB 75V ESC Speed Controller With Key Switch Based on VESC For Electric Scooter Ebike
Product Advantages
75100 With Alu. PCB V2.0 is based on VESC 75 series, programmable via vesc_tool3.0 (firmware5.2) with overheat and over current protection, regenerative braking capacity. It's designed with aluminum case, with good heat dissipation and max working voltage can be 20S, 84V. Also, 75100 With Alu. PCB V2.0: supports single serial port function, and integrates power on / off switch and key switch for Ebike / Escooter etc.
| Voltage | 14-84V (safe for 4-20S) | Modes | DC, BLDC, FOC (sinusoidal) |
| Continuous Current | 100A | Supported sensors: | ABI, HALL, AS5047,AS5048A |
| Max Current | 120A | EPRM | 150000 |
Product Advatages
Specs:
- Size: L103mm*W58mm*H18.5mm
- Voltage:14-84V (4-20S)
- Current:100A Continuous,burst 250A
- BEC:5V 1.5A
- Support BLDC square wave mode control and FOC sine wave mode
- Firmware: latest (firmware update supported)
- ERPM:150000
- Control Interface Ports:USB,CAN,UART
- Supported Sensors:ABI,HALL,AS5047,AS5048A
- Input Set Support:PPM,ADC,NRF,UART
- Wire Size: 12AWG
- Programmable: Yes
- Regenerative Capacity: Yes
It's recommended to use the old firmware version 5.02/5.2(3.00 VESC TOOL), which is more stable and no need to turn off the phase filter.
Phase filering is not available for Flipsky ESC75100 and 75200!
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.
YouTube:
Blog:
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.
YouTube:
Blog:
Please be careful to limit the Absolute Maximum Current below 250A.
Packaging & Shipping
- Choosing a selection results in a full page refresh.