Happymodel Bassline HD 2S 90mm 2 Inch Toothpick FPV Racing Drone with Walksnail Avatar Or HDZero Whoop Lite Digital System

Model: Gemfan toothpick 2023 tri-blade

Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm

X12 Lite AIO Flight Controller

(2.4G ELRS SPI Receiver Version)

Model: X12 Lite AIO; 

Target: CRAZYBEEF4SX1280

Item Name: X12 Lite AIO FC built-in SPI ELRS 2.4G receiver and Onboard 12A 4in1 ESC

MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: BMI270 orICM42688P(SPI connection)
Power supply:2S 6.5v~8.7v

Built-in Betaflight OSD(SPI Control)

Built-in 12A(each) Blheli_S 4in1 ESC

Built-in voltage detection
Built-in current sensor

Onboard 12A 4in1 ESC

Power supply: 1-2S LiPo/LiPo HV 
Current: 12A continuous ; peak 15A (3 seconds)
Support BLHeliSuite programmable
Default Factory firmware: Bluejay 0.16
Firmware target:Z_H_30_48_v0.16
Default protocol: DSHOT300

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz

Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Default Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware 
Could flash FC firmware to support ExpressLRS v3.0 TX module

CrazyF411 ELRS Flight Controller

( UART ELRS 2.4G receiver Version)

Item Name: CrazyF411 ELRS flight controller built-in UART ELRS 2.4G receiver

Target: CRAZYBEEF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:BMI270 orICM42688P(SPI connection)
Power supply:2S 6.5v~8.7v
Built-in 20A(each)Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 2.4G UART ExpressLRS Receiver
Built-in voltage detection
Built-in current sensor

Onboard 20A 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Currents: 20A continuous peak 25A (5 seconds)
Support BLHeliSuite programmable
Default Factory firmware: Bluejay 0.18
Firmware target: F_H_40_48_v0.18
Default protocol: DSHOT300

Onboard UART ELRS 2.4G Receiver

Default firmware version: ExpressLRS V3.0.1 

HDZero Version

( HDZero Nano Lite Camera HDZero Whoop Lite VTX)

HDZero Nano Lite Camera

Size: 14x16x11 mm
Weight: 1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Excellent low light performance
Fov: 4:3: D:130° H:108° v:84°; 16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX
1-3S Input
25mW/200mW RF Output-SmartAudio Support
25.5x25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5x32.5mm(29x29mm inner)
4.5grams/4mm Thickness (without shielding)

WalkSnail Version

(Walksnail Avatar HD mini 1s lite kit)

Avatar lite camera  
Image Sensor:  1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9  4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter Rolling: Rolling shutter
Min.Illumination:0.001Lux
Weight: 1.8g
Dimensions: 14*14*16mm

Avatar mini 1s VTX
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm

MIC:<25dBm
I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes 25.5*25.5mm
Dimensions 30*30*6.5mm
Storage 8G
Recording 1080p/720p
Weight 5.1g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-5V
Supported FC System Betaflight
OSD Canvas mode
Bitrate 25mbps 50mbps
Latency Average delay 22ms
Antenna IPEX