Dual FSESC6.7 Plus With Aluminum CASE based on VESC6 Electric Long

Upgraded features:

• Pro switch version:

• • Power on/off by pressing the button

• Added Can bus connector, be more convenient for 4WD set up

• Changed the USB port soldering process to SMT soldering instead of manual soldering

• Changed the big capacitors to SMT mounting capacitors ,and add more mosfets in the bottom side.
  

Spec:

- Hardware: V 6.6

- Firmware: Latest firmware version

- Voltage: 8V - 60V (Safe for 3S to 12S LiPo) for the dual ESC

- Voltage spikes may not exceed 60V

- Current: Continuous 100A single, total 200A ,  Instantaneous current 400A per single, total 800A for system instantaneous current. values depend on the mounting  and ambient temperature around the device!

- 5V 1.5A output for external electronics for single

- 3.3V 1A output for external electronics for single

- Modes: DC, BLDC, FOC (sinusoidal)

- Supported sensors: ABI, HALL, AS5047

-ERPM:150000

-Size: 78x78x20mm including heatsink 

-Motor wire: 12AWG

-Power cable:8AWG

-Recommend bullet connectors: 4MM Bullet Connector

          -Reminder: Detected battery voltagetolerance:+/-0.6V 

The shipping package contains:

• 1*Dual FSESC6.7 Plus+Heatsink

• 2*VESC Sensor Wires

• 1*LED button 

• 1*Micro USB

• 1*Manual

Other detail spec is the same with Dual FSESC6.7(big size version, without switch), you can get more information by here:

?spm=5261.ProductManageOnline.0.0.292e4edfocsVrL